Печать
Просмотров: 3818
 

Сервер Red Hat Linux 7.3

samba настройки сервера elis.it.ru


samba 2.2.3a-6


Конфигурационный файл /etc/samba/smb.conf
[root@elis /root]# less /etc/samba/smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = ELIS_NET

   netbios name = ELIS
;   netbios aliases = ELIS
;   netbios scope = ELIS

# server string is the equivalent of the NT Description field
   server string = ELIS Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.
   hosts allow = 172.18.14.2  172.18.14.5  172.18.14.19 \
		 172.18.92.16 172.18.92.17 172.18.92.18 172.18.92.19 \
		 172.18.92.20 172.18.92.21 \
		 172.18.93.90 172.18.93.91 172.18.93.93 172.18.93.94 \
		 172.18.94.4  172.18.94.5  172.18.94.6  172.18.94.7  \
		 172.18.94.10 172.18.94.11 172.18.94.12 \
		 172.18.94.16 172.18.94.17 172.18.94.18 172.18.94.19 \
		 172.18.94.22 172.18.94.23 172.18.94.31 \
		 172.18.157.1 172.18.157.5 172.18.157.9

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   printcap name = /etc/printcap
;   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = lprng

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
  guest account = nobody
;  guest account = pcguest
;  guest account = smbuser

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/%m.log
;   log file = /usr/local/samba/var/%m.log

# Put a capping on the size of the log files (in Kb).
   max log size = 500

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
;   security = SERVER
;   security = domain

# Use password server option only with security = server or
# security = domain
;   password server = 
;   password server = ELIS

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = Yes
  update encrypted = Yes
  smb passwd file = /etc/samba/smbpasswd
;  smb passwd file = /usr/local/samba/private/smbpasswd

  min passwd length = 3
;  syslog only = Yes
;  valid users = @elis
;  admin users = @alis, tab923


# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
;   ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
  unix password sync = Yes
  passwd program = /usr/bin/passwd %u
  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
;  passwd chat debug = Yes

;  restrict anonymous = Yes

  null passwords = true

# Unix users can map to different SMB User names
  username map = /etc/samba/smbusers
;  username map = /usr/local/samba/private/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m
;   include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
;   socket options = TCP_NODELAY

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#	a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44
;   remote announce = 172.18.94.1 172.18.157.1

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 
;   domain master = True

;   allow trusted domains = No
;   domain admin group = alis
;   domain guest group = elis
  
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes
;   preferred master = True

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 
;   dns proxy = yes

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
  preserve case = yes
  short preserve case = no

# Default case is normally upper case for all DOS files
  default case = lower

# Be very careful with case sensitivity - it can break things!
  case sensitive = no
  mangle case = yes
  client code page = 866

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
;[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# Set public = yes to allow user 'guest account' to print
;   guest ok = no
;   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

;[elis_adm]
;  comment = elis administrators
;  path = /data/
;  valid users = @alis
;  public = no
;  writable = yes
;  printable = no
;  create mask = 0776

[elis]
  comment = elis tasks
  path = /data/task
  valid users = @alis @elis elis
  public = no
  writable = yes
  browseable = yes
  printable = no
  create mask = 0776
  write list = @alis @elis elis

[clipper]
  comment = Clipper tasks
  path = /data/task/clipper
  valid users = @alis @elis elis clipper
  public = no
  writable = yes
  browseable = yes
  printable = no
  create mask = 0776
  write list = @alis @elis elis clipper

[ppr]
  comment = PPR task
  path = /data/task/clipper/ppr
  valid users = ppr
  public = no
  writable = no
  browseable = yes
  printable = no
  create mask = 0444


Файл настройки /etc/samba/smbusers
[root@elis /root]# less /etc/samba/smbusers
# Unix_name = SMB_name1 SMB_name2 ...
root = administrator admin
nobody = guest pcguest smbguest
elis = 923 817 834 898 120 479 425 945 084 952 953 258 132 755 323 272 817 231 131 153 281 .834.fbo.46.01.it 542
clipper = 236
ppr =
[root@elis /root]# less /etc/samba/smbusers (старая версия)
# Unix_name = SMB_name1 SMB_name2 ...
# Unix_name = SMB_name1 SMB_name2 ...
root = administrator admin
nobody = guest pcguest smbguest
tab022 = 022 .022.50.05.it
tab026 = 026 .026.50.05.it
tab028 = 028 .028.50.05.it
tab030 = 030
tab064 = 064
tab084 = 084
tab120 = 120 .120 .120.mts.46.01.it
tab131 = 131 .131.mts.46.01.it
tab132 = 132
tab153 = 153
tab231 = 231 .231.bobo.46.01.it
tab258 = 258
tab272 = 272
tab281 = 281 .281.mts.46.01.it
tab323 = 323
tab425 = 425
tab479 = 479
tab755 = 755
tab817 = 817
tab834 = 834 .834.bobo.46.01.it
tab898 = 898
tab901 = 901
tab923 = 923
tab945 = 945
tab952 = 952
tab953 = 953
tab954 = 954


Файл настройки /etc/samba/smbpasswd
[root@elis /root]# less /etc/samba/smbpasswd
nobody:99:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NU         ]:LCT-3DA43140:
elis:555:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NU         ]:LCT-3DA436A2:
clipper:560:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-3FA106CE:
ppr:561:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-3FA10764: