Рейтинг  

Яндекс.Метрика
Яндекс цитирования
 

   

Статистика  

Пользователи
7
Материалы
574
Кол-во просмотров материалов
2725392
   
 

Сервер Red Hat Linux 9.0

  • samba настройки сервера grossb.it.ru
  • Windows настройки рабочей станции для мапирования диска с сервера grossb.it.ru


    samba настройки сервера grossb.it.ru


    samba 2.2.7a-8.9.0


    Конфигурационный файл /etc/samba/smb.conf
    [root@grossb /root]# less /etc/samba/smb.conf
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    #
    # Any line which starts with a ; (semi-colon) or a # (hash) 
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors. 
    #
    #======================= Global Settings =====================================
    [global]
    
    # workgroup = NT-Domain-Name or Workgroup-Name
       workgroup = ELIS_NET
       netbios name = grossb
    
    # server string is the equivalent of the NT Description field
       server string = grossb Samba Server
    
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page
    ;   hosts allow = 192.168.1. 192.168.2. 127.
    ;   hosts allow = 172.18.94.
    
    # if you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    ;   printcap name = /etc/printcap
    ;   load printers = yes
    
    # It should not be necessary to spell out the print system type unless
    # yours is non-standard. Currently supported print systems include:
    # bsd, sysv, plp, lprng, aix, hpux, qnx, cups
    ;   printing = cups
    
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    ;  guest account = pcguest
      guest account = pcguest
    
    # this tells Samba to use a separate log file for each machine
    # that connects
       log file = /var/log/samba/%m.log
    
    # Put a capping on the size of the log files (in Kb).
       max log size = 0
    
    # Security mode. Most people will want user level security. See
    # security_level.txt for details.
       security = user
    
    # Use password server option only with security = server
    # The argument list may include:
    #   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    # or to auto-locate the domain controller/s
    #   password server = *
    ;   password server = 
    
    # Password Level allows matching of _n_ characters of the password for
    # all combinations of upper and lower case.
    ;  password level = 8
    ;  username level = 8
    
    # You may wish to use password encryption. Please read
    # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
    # Do not enable this option unless you have read those documents
       encrypt passwords = yes
       smb passwd file = /etc/samba/smbpasswd
    
    # The following is needed to keep smbclient from spouting spurious errors
    # when Samba is built with support for SSL.
    ;   ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt
    
    # The following are needed to allow password changing from Windows to
    # update the Linux system password also.
    # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
    # NOTE2: You do NOT need these to allow workstations to change only
    #        the encrypted SMB passwords. They allow the Unix password
    #        to be kept in sync with the SMB password.
       unix password sync = Yes
       passwd program = /usr/bin/passwd %u
       passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
    
       null passwords = Yes
    
    # You can use PAM's password change control flag for Samba. If
    # enabled, then PAM will be used for password changes when requested
    # by an SMB client instead of the program listed in passwd program.
    # It should be possible to enable this without changing your passwd
    # chat parameter for most setups.
    
       pam password change = yes
    
    # Unix users can map to different SMB User names
      username map = /etc/samba/smbusers
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /etc/samba/smb.conf.%m
    
    # This parameter will control whether or not Samba should obey PAM's
    # account and session management directives. The default behavior is
    # to use PAM for clear text authentication only and to ignore any
    # account or session management. Note that Samba always ignores PAM
    # for authentication in the case of encrypt passwords = yes
    
      obey pam restrictions = yes
    
    # Most people will find that this option gives better performance.
    # See speed.txt and the manual pages for details
       socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
    
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    ;   interfaces = 192.168.12.2/24 192.168.13.2/24 
    
    # Configure remote browse list synchronisation here
    #  request announcement to, or browse list sync from:
    #	a specific host or from / to a whole subnet (see below)
    ;   remote browse sync = 192.168.3.25 192.168.5.255
    # Cause this host to announce itself to local subnets here
    ;   remote announce = 192.168.1.255 192.168.2.44
    
    # Browser Control Options:
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    ;   local master = no
    
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    ;   os level = 33
    
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    ;   domain master = yes 
    
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ;   preferred master = yes
    
    # Enable this if you want Samba to be a domain logon server for 
    # Windows95 workstations. 
    ;   domain logons = yes
    
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    ;   logon script = %m.bat
    # run a specific logon batch file per username
    ;   logon script = %U.bat
    
    # Where to store roving profiles (only for Win95 and WinNT)
    #        %L substitutes for this servers netbios name, %U is username
    #        You must uncomment the [Profiles] share below
    ;   logon path = \\%L\Profiles\%U
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    ;   wins support = yes
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    #	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one	WINS Server on the network. The default is NO.
    ;   wins proxy = yes
    
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
    # this has been changed in version 1.9.18 to no.
       dns proxy = no 
    
    # Case Preservation can be handy - system default is _no_
    # NOTE: These can be set on a per share basis
    ;  preserve case = no
      preserve case = Yes
    ;  short preserve case = no
    # Default case is normally upper case for all DOS files
    ;  default case = lower
      default case = lower
    # Be very careful with case sensitivity - it can break things!
    ;  case sensitive = no
      case sensitive = no
    
      mangle case = yes
      client code page = 866
    
    #============================ Share Definitions ==============================
    [homes]
       comment = Home Directories
       browseable = no
       writable = yes
       valid users = %S
       create mode = 0664
       directory mode = 0775
    # If you want users samba doesn't recognize to be mapped to a guest user
    ; map to guest = bad user
    
    
    # Un-comment the following and create the netlogon directory for Domain Logons
    ; [netlogon]
    ;   comment = Network Logon Service
    ;   path = /usr/local/samba/lib/netlogon
    ;   guest ok = yes
    ;   writable = no
    ;   share modes = no
    
    
    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ;[Profiles]
    ;    path = /usr/local/samba/profiles
    ;    browseable = no
    ;    guest ok = yes
    
    
    # NOTE: If you have a BSD-style print system there is no need to 
    # specifically define each individual printer
    ;[printers]
    ;   comment = All Printers
    ;   path = /var/spool/samba
    ;   browseable = no
    # Set public = yes to allow user 'guest account' to print
    ;   guest ok = no
    ;   writable = no
    ;   printable = yes
    
    # This one is useful for people to share files
    ;[tmp]
    ;   comment = Temporary file space
    ;   path = /tmp
    ;   read only = no
    ;   public = yes
    
    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ;[public]
    ;   comment = Public Stuff
    ;   path = /home/samba
    ;   public = yes
    ;   writable = yes
    ;   printable = no
    ;   write list = @staff
    
    # Other examples. 
    #
    # A private printer, usable only by fred. Spool data will be placed in fred's
    # home directory. Note that fred must have write access to the spool directory,
    # wherever it is.
    ;[fredsprn]
    ;   comment = Fred's Printer
    ;   valid users = fred
    ;   path = /home/fred
    ;   printer = freds_printer
    ;   public = no
    ;   writable = no
    ;   printable = yes
    
    # A private directory, usable only by fred. Note that fred requires write
    # access to the directory.
    ;[fredsdir]
    ;   comment = Fred's Service
    ;   path = /usr/somewhere/private
    ;   valid users = fred
    ;   public = no
    ;   writable = yes
    ;   printable = no
    
    # a service which has a different directory for each machine that connects
    # this allows you to tailor configurations to incoming machines. You could
    # also use the %U option to tailor it by user name.
    # The %m gets replaced with the machine name that is connecting.
    ;[pchome]
    ;  comment = PC Directories
    ;  path = /usr/local/pc/%m
    ;  public = no
    ;  writable = yes
    
    # A publicly accessible directory, read/write to all users. Note that all files
    # created in the directory by users will be owned by the default user, so
    # any user with access can delete any other user's files. Obviously this
    # directory must be writable by the default user. Another user could of course
    # be specified, in which case all files would be owned by that user instead.
    ;[public]
    ;   path = /usr/somewhere/else/public
    ;   public = yes
    ;   only guest = yes
    ;   writable = yes
    ;   printable = no
    
    # The following two entries demonstrate how to share a directory so that two
    # users can place files there that will be owned by the specific users. In this
    # setup, the directory should be writable by both users and should have the
    # sticky bit set on it to prevent abuse. Obviously this could be extended to
    # as many users as required.
    ;[myshare]
    ;   comment = Mary's and Fred's stuff
    ;   path = /usr/somewhere/shared
    ;   valid users = mary fred
    ;   public = no
    ;   writable = yes
    ;   printable = no
    ;   create mask = 0765
    
    
    [map]
            comment = mapping scripts
    	path = /elis/tasks/map
            valid users = @alis @elis alis elis
    	public = yes
            browseable = yes
    ;	only guest = yes
    ;	writable = yes
    	printable = no
    
    [tasks]
            comment = task programmers
            path = /elis/tasks
            valid users = @alis @elis alis elis programer anybody suntech
            public = yes
            writable = yes
            browseable = yes
            printable = no
            create mask = 0664
    
    [tasksrv]
       comment = Home Directory of ELIS for Programmers
       path = /elis/tasksrv
       valid users = @alis @elis ais elis programer
       public = yes
       writable = yes
       browseable = yes
       create mask = 0777
       write list = @alis @elis alis
    
    ;[hm_fkart]
    ;   comment = Start files of Finans Kart for users
    ;   path = /elis/tasksrv/hm_fkart
    ;   valid users = @alis @elis ais elis hm_fkart
    ;   public = yes
    ;   writable = no
    ;   browseable = yes
    ;   create mask = 0777
    
    
    

    Файл настройки /etc/samba/smbusers
    [root@grossb /root]# less /etc/samba/smbusers
    # Unix_name = SMB_name1 SMB_name2 ...
    root = administrator admin
    anybody = guest pcguest smbguest all user svi usp scr3 oid2 dana Marka marka1 sb 948
    #anybody = guest pcguest smbguest all user svi usp scr3 oid2 dana PDBP1 meh 003 032 045 061 075 090 120 121 177 150 152 154 156 157 158 159 160 167 169 175 179 180 182 183 184 185 186 188 301 308 407 449 456 529 532 533 534 538 541 604 605 817 948 Marka marka1 sb
    #nobody = guest pcguest smbguest
    programer = 084 817 945 952 953
    alis = 923 950
    elis = PDBP1 meh teb6 001 003 032 045 061 075 090 55000094 120 121 177 150 152 154 156 157 158 159 160 167 169 175 179 180 182 183 184 185 186 188 301 308 407 449 456 483 529 532 533 534 538 541 604 605 817 Marka marka1 sb
    hm_fkart = 150 152 154 159 167 169 175 176 179 180 183 184 186 188
    
    

    Файл настройки /etc/samba/smbpasswd
    [root@grossb /root]# less /etc/samba/smbpasswd
    nobody:99:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-40459945:
    alis:500:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-3FC48D2A:
    elis:555:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-3FC34A61:
    programer:505:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-403ED027:
    anybody:510:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-40618A78:
    hm_fkart:504:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NUX        ]:LCT-3FC47C29:
    

    Windows настройки рабочей станции для мапирования диска с сервера grossb.it.ru



    box_ELIS.bat - bat-файл для автосоздания ярлыков на рабочем столе Windows
    [C:\make>more box_ELIS.bat]
    IF NOT EXIST l:\bin\grossb  net use l: \\grossb.it.ru\tasks  /yes
    IF EXIST C:\elis\ELIS(box).pif  EXIT
      mkdir C:\elis
      copy l:\make\z32elis(box).bat	C:\elis\z32elis(box).bat /Y
    
    IF %OS% == Windows_NT  goto winnt
      copy l:\make\ELIS(box).pif	%windir%\РАБОЧИ~1\ELIS(box).pif /Y
      goto win9x
    :winnt
      copy l:\make\ELIS(box).pif	"%USERPROFILE%\РАБОЧИ~1\ELIS(box).pif" /Y
    :win9x
      copy l:\make\ELIS(box).pif	C:\elis\ELIS(box).pif /Y
    rem @call C:\elis\z32elis(box).bat
    
    [C:\make>]
    

    box_CENN.bat - bat-файл для автосоздания ярлыков на рабочем столе Windows
    [C:\make>more box_CENN.bat]
    IF NOT EXIST l:\bin\grossb  net use l: \\grossb.it.ru\tasks  /yes
    IF EXIST "C:\elis\Ценник(box).pif"  EXIT
      mkdir C:\elis
      copy l:\make\z32cen(box).bat	C:\elis\z32cen(box).bat /Y
    
    IF %OS% == Windows_NT  goto winnt
      copy "l:\make\Ценник(box).pif"	"%windir%\РАБОЧИ~1\Ценник(box).pif" /Y
      goto win9x
    :winnt
      copy "l:\make\Ценник(box).pif"	"%USERPROFILE%\РАБОЧИ~1\Ценник(box).pif" /Y
    :win9x
      copy "l:\make\Ценник(box).pif"	"C:\elis\Ценник(box).pif" /Y
    rem @call C:\elis\z32cen(box).bat
    
    [C:\make>more box_CENN.bat]
    

     

  •    
       

    Login Form